Centurion R5 User's Guide

INSTALLATIONMANUALLatest Revision: 11.06.2004Document Ref: 1150.D.01.0009_5Product Code: CP70R5USER GUIDERange of SwingGate Operators

AUTO-CLOSE OVERRIDEIf the auto-close function has been selected it can be conveniently and easily overridden for one cycle. This override feature is a

Gate Status Indication (optional feature)The controller can provide visual indication inside the house of the position of the gate and the condition o

CP84ER5V01If the gate status indicator has not been fitted, there is an equivalent LED mounted on the CP75 marked STATUS, which can be used as a fault

system will shut down and it will not be possible to operate the gate. When the keyswitch is ON, the gate system will operate normally.This is an adde

To release the manual override, proceed as follows:Page 14Setup Tool(DO NOT USE)Allen KeySwing open the manual release dust cover. Insert the allen ke

Page 15Allen KeyRotate the dust cover back into position.Unscrew the allen key (counter-clockwise) until the top of the screw is flush with the top of

The CENTURION system is designed to be maintenance free. However, there are some basic checks that should be carried out regularly (every six months)

BatteryAll CENTURION domestic systems are fitted with a maintenance free lead acid battery that should provide at least three years of uninterrupted o

Maximum gate length & mass:*Subject to system power supply. Standard battery driven system with 7A/H battery is limited to 20 operations per day.#

see if the symptom corresponds to any given in the list below. For each symptom listed, the probable cause and action to be taken is given. In the eve

Company Profile...3Introduction...

ACTIONCAUSESYMPTOM!Gate does not operate but the relays on the controller "click" momentarily.!Gate does not operate and there is no reactio

ACTIONCAUSESYMPTOMinput LED's are OFF. They must only light up when the corresponding input is activated.!Try operating the system using the TEST

ACTIONCAUSESYMPTOM!Check that the RED LED's adjacent each trigger input on the controller (TRG, FRX, PED) are OFF and only switch ON when that in

Page 23All CENTURION products are manufactured with extreme care, thoroughly inspected and tested. They are guaranteed for a period of 12 months, prov

CENTURIONTHE AUTOMATIC CHOICE CENTURION SYSTEMS (PTY) LTD HEAD OFFICE:TEL: +27 (0)11 699-2400, FAX: +27 (0)11 704-3412 or 462-6669 148 EPSOM AVENUE, N

CENTURION SYSTEMS has been manufacturing automatic gate systems since 1987, and is committed to providing reliable, cost effective solutions in the fi

IntroductionIntroductionA CENTURION GATE AUTOMATION system is a quality product designed to give many years of trouble free use, provided it is correc

4. Be careful with moving parts and avoid close proximity to areas where fingers or hands could be pinched.5. Secure all easily accessed gate opener c

IntroductionThe R3 and R5 Rotary arm operators are fitted with the CP75 controller. The controller synchronizes the functions of the gate operator. Mo

If the gate is opening with the automatic closing facility selected, and the transmitter is then pressed, theMost automatic gate installations are fit

requiring greater security as the gate closes immediately behind the vehicle or person passing through.PIRAC will operate only if a protection beam or

MULTIPLE COLLISIONIf the system is obstructed repeatedly 4 times after the initiation of an opening cycle, and before the master motor gets back to it