12. Fit the operator, additional security gate
bracket pins and snap rings.
Page 28
FIGURE 40
FIGURE 42
As additional security to the snap
ring, fit a padlock and the optional
padlock shield.
15. Attach warning decals to the gate as
shown.
OR
Pin
Wall adaptor
(standard)
Padlock
VECTOR2
operator
FIGURE 41
Adjust Origin Clamp
Origin
marker
13. Unlock the operator and open the gate to
the desired fully open position.
14. Slide the origin clamp along the actuator
tube, right up to the operator. Secure in
place with an Allen key and tighten
properly.
Open
Comments to this Manuals